Barely used Tilta Hydra Alien Car Mounting Pro Kit System for use with DJI Ronin RS2/RS3 Gimbals.  Includes both the standard and soft shock absorbing head.  Also includes the Tilta 2" Speed Rail Clamp for use with the Hydra Shock Absorbing Arm.  Only used on a couple shoots but I'm downsizing and looking to clear out some space.

16.5 lb Load Capacity
Shock-Absorbing Arm
Remote Kit for RS2
8 x Installation Modes
110 lb Suction Cup Payload

GALEN MURRAY

Tilta Hydra Alien Car Mounting Pro Kit (V Mount) w/ Speed Rail Mount

Paralinx Tomahawk 2 1:2 2000' SDI Kit w/Panel Array

Comes in custom Pelican case with padded insert.  Allows for image transmission of up to 2000'.  Can be paired with Teradek Bolt 2000.

Kit includes:
2x Receivers with Gold Mount and SDI out
1x Transmitter with SDI in/out and HDMI in
1x Long Range Panel Array Antenna with Gold Mount (recently serviced to like new condition)
1x Custom Pelican Case
Various omnidirectional antennae
Various SDI cables
Various Lemo Power cables

Paralinx (Teradek) Tomahawk 2 1:2 2000' Kit w/Panel Array

Open Box Rokinon 35mm T/1.5 Cine Lens for Canon EF MountThis lens is open-box with practically no signs of use. Unfortunately, it's missing the lens hood, but included the front and rear lens caps. Everything appears as if brand new. Comes with: Rokinon 35mm T/1.5 EF, front/rear lens caps, and original box

Open Box Rokinon 35mm T/1.5 Cine Lens for Canon EF Mount<div><br></div><div>This lens is open-box with practically no signs of use. Unfortunately, it's missing the lens hood, but included the front and rear lens caps. Everything appears as if brand new.&nbsp;</div><div><br></div><div>Comes with: Rokinon 35mm T/1.5 EF, front/rear lens caps, and original box</div>

Continental U.S.

Rokinon 35mm T/1.5 Cine Lens for Canon EF

Bundle deal with camera body, lens, camera strap, two battery charger, two batteries (one battery is original Nikon battery) and Smallrig Coldshoe Windmuff. The camera has a 49 shot count and was only used very lightly for a short time as a test camera. 

The Nikon Z 30 Mirrorless Camera with NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens Bundle is a high-quality camera designed for photography enthusiasts. It features a 20.9 MP maximum resolution, f/3.5 maximum aperture, and 1x digital zoom. The camera has a 3-inch touch screen and is powered by a Lithium-Ion battery. It also has USB connectivity and comes in black. The camera is part of the Nikon Z series and is a mirrorless interchangeable lens camera.

ASA REQUA MAASS

Nikon Z30 Mirrorless Camera + NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens Bundle

Ulanzi Filmog Ace FM01 Tiny Fog Machine

This light is brand new, never used, only opened for inspection. Does not include original box.

ZHIYUN Molus G200 200W Bi-Color LED Video Light

The edelkrone SliderPLUS v5 PRO Long is designed with movable rails that travel during a slide to give you extra travel distance while keeping the slider compact. When used on the ground or other surface, it has a travel length of 1.3' and supports up to 40 lb. Mounted on a tripod, it provides a travel length of 2.6' with up to 20 lb loads supported, meaning you can work with heavy camera rigs. The movable design also works for dolly shots, because since the rails move along with the carriage, they won't get in the shot when you dolly in and out. The SliderPLUS v5 PRO Long is a manual ball bearing slider, but it supports the optional Slide Module v3 attachment for motion control, and other edelkrone motorized add-ons can be incorporated for fully synchronized multi-axis motion control operated via a single iOS/Android app. When paired with the Slide Module v3, the SliderPLUS v5 PRO Long can be mounted on a tripod at an incline of up to 22.5° with up to 5.5 lb loads. The slider carriage features a retractable 3/8"-16 mounting screw so it doesn't scratch up your bag or anything else during transport. On the bottom, the slider offers a 3/8"-16 thread for more robust tripod mounting. For tripod-mounted use, edelkrone suggests that the space between the tripod legs be 47" or more. Other features include lockable fold-out legs, an instant-lock button on the slider carriage so you can safely move the slider from place to place, and magnetic belt clips. The belt clips of the included belts simply push in onto the slider carriage for efficient use. The SliderPLUS v5 PRO Long is made of aluminum and stainless steel components, steel ball bearings, and temperature-treated aluminum rods. Some of the parts are made from a single block of aluminum to ensure a longer life span.

RYAN POLANCO

Edelkrone 81181 SliderPLUS v5 PRO Long Dual-Length Slider with Movable Rails

Ulanzi LT003 10" RGB LED Video Light

Slider is in great condition, very lightly used, clean, durable, and affordable. It’s been awesome, just don’t have the use for it. Includes all accessories and case.

JOB JOHNTON

GVM GP Motorized Carbon Fiber Video Slider (48")

Meike MK-EFTR-C VND Drop-in Filter AF Mount Adapter for Canon EF to EOS R R5 R6. Works great on my komodo.  I upgraded to pl version so no longer need this.  Comes with shims although you don't need them. and VND and a clear filter.

RON MORALES

Meike MK-EFTR-C VND Drop-in Filter AF Mount Adapter for Canon EF to EOS R R5 R6

Up for sale is a Cine Tape Measure system. Good condition. Comes with: Flat plate w 3/8" 16 tiedown-screw for mounting MDR for FIZ Small Yoga Arm Cinetape sensor module (3) 5-pin Fischer (M) to 5 pin (M) cine tape sensor cable (2)3-pin Fischer (M) to 3-pin Fischer (M) arri cinetape power cable (2) 3-pin Fischer (M) to Anton bauer P-tap (M) cine tape power cable (1) Pelican case 2, 3 pin to 3 pin power cables, 3 sensor cables and many Preston interface cables of different lengths. Also included is a Pelican case

Cinetape Kit (CE Cinematography Electronics Cine Tape Measure)

Aputure Accent B7C RGBWW LED 8-Light Kit with Charging Case.  I used these once for a project and love them.  I wish I could keep them but need to off load some equipment.

Aputure Accent B7C RGBWW LED 8-Light Kit with Charging Case

This is a very clean set of CP2's.  

Zeiss CP.2 Lenses EF and PL Mount 5 Set (21mm,28 35mm, 50mm, 85mm) plus Case. Right now they are in EF configuration but can easily be changed to PL. the set comes with shims needed to adjust for back focus. 21mm T2.9 28mm T2.1 35mm T2.1 50mm T2.1 85mm T2.1.  Comes with a pelican case as seen in the pictures.  Covers full frame and can also be adapted to other lens mounts.

ZEISS Compact Prime CP.2  5-Lens Cinema Set (PL and EF ) Full Frame

Lightly used nucleus nano. Comes with extras. 8 batteries and 2x micro usb D-TAP cables for more torque on the motor. Great for cinestyle lenses. I upgraded and no longer need this one.

 TILTA Nucleus Nano WLC-T04 Wireless Lens Control System With Extras

It's an awesome lens and very clean.  I've only used it a hand full of times mainly in studios or inside locations. Comes with padded case, lens hood, a removable seamless follow focus gear.

Sigma 50-100mm f/1.8 DC HSM Art Lens - EF

Godox Ving V860III TTL Li-Ion Flash Kit for Sony Cameras

Like new, used only a handful of times. Includes:

- Godox Ving V860III TTL Li-Ion Flash Kit for Sony Cameras
- Lithium Battery
- Battery Charger
- USB Cable
- Mini Stand
- Protective Case

Godox Ving V860III TTL Li-Ion Flash Kit for Sony Cameras

Laowa Nanomorph 1.5x anamorphic lenses in Fujifilm  Mount.

27mm t2.8 (no box included) + 35mm t2.4 (original box included) + 50mm t2.4 (original box included)

All 3 lenses are in excellent condition with minimal signs of use.

ETHAN BARNES

Laowa Nanomorph Anamorphic Silver Fuji X Mount lens set - 27mm + 35mm + 50mm

Hollywood Production RED Epic-X Dragon 6K Package

Included in Package:
- RED Epic-X Dragon 6K Camera (1343.6 Hours)
- Low Light and Standard OLPH Pre-Filters
- PL, Panavision, Nikkor Mounts
- Rear Gold Mount Power Module
- RED Bomb Eyepiece with Long Eyepiece Bracket
- RED 5" LCD Touchscreen Monitor
- Gold Mount to V -Mount Adapter
- V-Mount Belt Pack
- Assorted Cables
- View Factor Top, Side and Bottom Plates with Top Handle
- 3Ality Hybrid Bridge Plate Core with 19mm Camps, Dovetail Plate, 19mm Rods
- Red Rock Swing Away Matte Box
- Red Rock Follow Focus
- 3x V Mount Red Batteries and 2x Chargers
- Red Mags (2x 256gb, 2x 128gb, 2x 64 gb)
- RedStation Mini Card Reader
- Pelican Case

RED Epic-X Dragon 6K camera package. LOADED!! Tons of extras with this one –
starting with one of the nicest looking sensors on a 6K camera you will find anywhere.

This camera was used on both “Ride Along” movies – and dozens of other big feature film productions. It has been impeccably maintained and is looking forward to years more!

The Low-Light OLPH is currently installed – which is probably the most attractive pre-filter to have on this camera…and gives the greatest ISO options with little noise in the blacks. The original Standard OLPH is included as well.

In addition to the rugged PL Mount, a Panavision mount and Nikkor mount are included.

This camera was consigned with Panavision for a year and some of the parts are
engraved as such. A release letter from Panavision attesting to this is available upon request.

There are a number of power options included, beginning with a two-part rear module (w/Gold Mount) that provides an additional LCD/Viewfinder port so a RED Bomb eyepiece and 5” RED LCD Touchscreen monitor (both included) can be run simultaneously.

This revolutionary module was truly a game changer for the Dragon - which had always been challenged by power and video options. The module provides SDI-out ports, Sound Sync, and 2-pin, 3-pin power/RS ports. A 4-pin XLR port also allows a block battery and cable to power the camera.

Included additional power options are a Gold Mount to V-Mount adapter plate, V-Mount belt pack, Gold Mount plate with short cable and an AC power adapter (with cables).  Several power cable options are also included.

The camera is built out with a View Factor top, side and bottom plate and top handle, giving all the attachment options you could want. A DSMC top mount provides an adjustable short-eyepiece system, and there is an attachable long-eyepiece bracket system as well.

A 3Ality Hybrid Bridge Plate core with 19mm clamps will slide onto the included dovetail plate. I am throwing in some 19mm rods and a RedRock swing away studio matte box with 4x5.65 filter trays and a follow focus.

Rounding out the package are half-dozen media cards, card reader, three (3) V-Mount RED batteries and two battery chargers.

Red Epic X Dragon 6K Full Production Kit

Selling my New and never used Tilta Advanced Ring Grip for DJI RS 2, RS3

When I bought it, there was only the RS2 so it explains the pakaging photo and nomenclature. 

But this is compatible with all RS models RS2, RS# and RS4. 

However... it includes additional items:

2 x Tilta Power Supply Module for Ring Grip
1 x Tilta Battery Plate for DJI RS 2/RS 3/RS 3 Pro Ring Grip (V-Mount)
1 x Tilta Soft-Shell Case for Advanced Ring Grip

All brand new and never used.





CLARKE SMITH

Tilta Ring for DJI RS2 - and for RS3

Note that this listing is for the bag only. Core units can be obtained from Shimoda or retailers like B&H and make for a nice way to switch gear between bags. This bag originally retails for $359.95. I've also included the matching rain cover which did not originally come with this bag. The bag itself is in excellent condition - there are only a few scuffs that would let you know it's been used, which I included in the pictures. All original hardware (fastening straps, zippers, ice axe loops, etc) is included and undamaged.

Description by Shimoda:
This is our biggest pack, created to accommodate our new DV Core Units (Large and Extra Large). The Action X70 accommodates larger Cine, Digital Video and DSLR camera kits. Its 70L of volume carries a lot of gear and is supported by an extra-plush and supportive removable belt and adjustable shoulder strap system.

Like all Action X series packs, it features an expandable roll-top that can quickly add 7 liters of volume to the bag. Two large side pockets are great for packing gimbals. The shoulder straps have two zipper sleeves to carry most phone sizes, plus accessories or a water bottle. The X70 also makes a great camping bag for photographers chasing sunrises in remote locations.

- *Core Units sold separately

- Anti-theft Rear Camera Access - Allows wide, unobstructed access to the bulk of your gear, and cannot be opened during travel except by the user.

- Adjustable Torso Height - The X70 has 4 height options with approximately 10 cm (4 in) of vertical adjustment. This means the same backpack can fit short or tall — male or female — torso heights, ensuring a custom fit for everyone.

- Core Unit Modular Camera Insert System - The X70 fits our DV (Digital Video) Core Units which are available in Large or Extra Large and offer users a larger, Cine camera set-up that’s ready to go right out of the bag. Wildlife or sports shooters will appreciate its ability to pack and protect a super-telephoto lens.
Expandable Roll-Top - The roll top can expand with a volume range of 7-liters so the bag can be adjusted to your gear needs while maintaining a tight and compact fit.

- Sport-Friendly Design - With action sport-specific features like a removable helmet holder, ski fastening straps, hydration routing and extra durable materials to help protect the pack from abrasion, Action X packs are designed to perform seamlessly for photographers and filmmakers who like to be embedded in the action.

DANIEL A FOX

Shimoda Designs Action X70 Backpack (Black)

Selling a like new kit of Freewell's Magnetic VND system in 82mm. Includes all the original parts (see below), just not the original manufacturer packaging. This retails for $399 on B&H.

In the kit:
Magnetic Base Ring
Variable ND2 to ND5 Filter
Variable ND6 to ND9 Filter
Variable ND2 to ND5 Mist Filter
Variable ND6 to ND9 Mist Filter
1/8-Grade Glow Mist Filter
ND32/CPL Filter
Standard CPL Filter
Lens Cap
Protective Case

Note that this system works by flipping the filters around for a different effect. So some of the physical items are actually two filters in one, which is why you don't get as many pieces as you'd initially expect. For instance, the 2-5 stop filter is also the CPL filter when you flip it over and remove the VND base.

Freewell 82mm Magnetic Variable ND (VND) Filter System

POWERFUL MOBILE APP CONTROL - Easily control lights like the original PavoTube 30C and 15C, Forza 500, and MixPanel 150 wirelessly with the free NANLINK mobile app. You can group lights, synchronize effects, and fine-tune dimming, HSI, and CCT.
MULTIPLE POWER OPTIONS - It has a built-in 2400 mA battery and can run constantly for 10 hours. An integrated USB-C port allows you to add future firmware updates and power the device with a USB powerbank battery. You can also use this port to connect the WS-TB-1 directly to an AC outlet.
COMPACT AND EASY TO MOUNT - Deisgned to be as small and lightweight as possible while still providing all-day battery life and a robust control signal. Internal antennas keep the size to a minimum. A 1/4-20 socket, belt-clip, and an integrated ring give you many different ways to mount it.
COMPATIBLE WITH MANY LIGHTS - Fully compatible with the PavoTube II X-Series, PavoTube II 15C and 30C, PavoTube II 6C, Forza 500, 300 II, 300B II, 200, 150, 60C, and 60B, MixPanel 150 and 60, FS-300B, 200B, and 150, LumiPad 11, Compac 200 and more.

All Products