This is the official US site for purchasing the BlueMark the modules through Alien Drones!
BlueMark extends its family of RemoteID transponders for FPV drones with the db152fpv module.
DroneBeacon FPV is a family of modules that are so-called direct or broadcast audited Remote ID long-range transponders (both FAA and EU) and need both an external GPS receiver (NMEA or UBX) and external power (by the drone).
Audited RemoteID means that an external audit has confirmed that these modules are compliant with regulation in the USA and EU. Read why this matters here.
The DroneBeacon db152fpv is a small, but powerful (direct/broadcast) stand-alone Remote ID transponder for drones with 20 x 20 M3 holes and needs an external GNSS receiver. It is designed for FPV drones and supports any GNSS receiver with NMEA or UBX (u-blox) protocol. Of course, it can be used for other drones as well.
It is a PCB and needs an external GNSS (GPS) receiver (NMEA or UBX).
It relays the GNSS information via the GPS out connector to the flight controller. The connectors are 6-pin JST-SH 1 mm. An antenna is provided (WLAN/BLE). The board and attached GNSS receiver are powered via the VCC pin of the GPS OUT port (4.75 to 15V). The db152fpv has a 20 x 20 grid with M3 holes for easy installation. The size of the board is 27 x 27 mm and the weight is 2.9 gram (including antenna).
DB152 Manual: https://download.bluemark.io/db152fpv.pdf
.
How to Configure Video: https://youtu.be/6nrq-DlshcI